PACKOUT Organizers —
Every Small Part in Its Place.
The Milwaukee PACKOUT Organizers bring the same IP65 protection, impact-resistant construction, and universal PACKOUT locking compatibility to your fasteners, bits, connectors, and accessories. Three sizes — Compact, Standard, and Large — every one built to keep your smallest but most essential parts organized, protected, and instantly accessible on any job site.
✓ Secure-Lid Compartments
✓ Universal PACKOUT Lock
✓ 3 Sizes Available
Choose Your Size
All Milwaukee PACKOUT Organizer Models
Model 48-22-8430
PACKOUT Compact Organizer
- Smallest organizer in the lineup
- Multiple secure-lid compartments
- IP65 weather protection
- Ideal for bits, small fasteners
- Universal PACKOUT locking base
Model 48-22-8431
PACKOUT Organizer
- Multiple compartment sizes
- Secure individual lids per compartment
- IP65 weather protection
- Mixed fasteners & accessories
- Universal PACKOUT locking base
Model 48-22-8435
PACKOUT Large Organizer
- Maximum organizer capacity
- More & larger compartments
- IP65 weather protection
- Full accessory collections
- Universal PACKOUT locking base
On This Page
What Are the Milwaukee PACKOUT Organizers?
The Milwaukee PACKOUT Organizers are dedicated small-parts storage units within the Milwaukee PACKOUT modular storage system. While the PACKOUT carry cases store tools and the drawer units organize hand tool collections, the PACKOUT Organizers solve a problem every tradesperson faces daily: keeping fasteners, drill bits, wire connectors, blade sets, cable ties, and small accessories organized, protected, and immediately accessible without digging through a pile of loose hardware.
Every Milwaukee PACKOUT Organizer features multiple individual compartments with secure lids that prevent contents from mixing or spilling during transport — even when the unit is tilted or inverted. Every size carries the same IP65 weather protection rating and uses the universal PACKOUT locking interface, making them fully compatible with the rolling base, carry cases, drawer units, and every other unit in the PACKOUT ecosystem.
For official Milwaukee specifications, visit milwaukeetool.com — the official Milwaukee Tool website.
Comparing All 3 Milwaukee PACKOUT Organizer Models
| Model | Best For | Compartments | IP Rating |
|---|---|---|---|
| Compact Organizer48-22-8430 | Small bit sets, minimal fastener collections, apprentice kits | Multiple small secure-lid compartments | IP65 |
| Organizer48-22-8431 | Mixed fasteners, connectors, blades, and everyday accessories | Multiple compartments — mixed sizes | IP65 |
| Large Organizer48-22-8435 | Comprehensive accessory collections, full bit sets, hardware assortments | More compartments in larger sizes | IP65 |
Stop losing small parts on the job site. PACKOUT Organizers keep every fastener, bit, and connector exactly where you left it.
Key Features Across Every Milwaukee PACKOUT Organizer
- ✓Secure Individual Lids Per Compartment. Unlike basic organizer trays where everything spills into one pile when the lid opens, every compartment in a PACKOUT Organizer has its own secure lid. Tilt it, invert it, drop it — each compartment stays sealed and its contents stay exactly where you put them.
- ✓IP65 Weather Protection. Every Milwaukee PACKOUT Organizer — Compact, Standard, and Large — carries a certified IP65 rating. Your bits, connectors, and hardware stay completely dry even when the organizer is stored in a wet truck bed or left out in rain on the job site.
- ✓Universal PACKOUT Locking Interface. All three organizer models lock directly onto the PACKOUT Rolling Tool Box (48-22-8426), onto PACKOUT carry cases, and onto the drawer units using the same universal interface. Stack your organizer on top of your tool cases and it travels with the rest of your PACKOUT system.
- ✓Impact-Resistant Polymer Body. The same high-grade polymer used across the entire PACKOUT system protects the organizer from drops, impacts, and rough transport — keeping both the unit and its contents safe in professional job site conditions.
- ✓Built-In Carry Handle. Every PACKOUT Organizer includes an integrated carry handle, allowing it to be used completely independently off the PACKOUT stack — carried in one hand to exactly where the small parts are needed.
What to Store in Each Milwaukee PACKOUT Organizer
Fasteners
Screws, bolts, nuts, washers, and anchors sorted by size and type across dedicated compartments.
Drill Bits
Full bit sets, step bits, hole saws, and specialty drill bits organized by size for instant access.
Wire Connectors
Wire nuts, push-in connectors, butt splices, and terminal ends sorted by gauge and type.
Blade Sets
Utility knife blades, jigsaw blades, reciprocating saw blades, and scoring blades by type.
Driver Bits
Phillips, flathead, Torx, hex, and specialty driver bits organized for fast selection on the job.
Small Hardware
Cable ties, staples, push pins, clips, springs, and any small hardware that disappears in a loose bag.
Which Trades Benefit Most From PACKOUT Organizers
Electricians — Standard Organizer (48-22-8431)
Electricians carry more variety of small parts than almost any other trade — wire connectors in multiple gauges, breaker knockouts, cable staples, ground screws, wire nuts, and push-in connectors. The PACKOUT Organizer (48-22-8431) keeps all of these sorted by type and immediately accessible, eliminating the time wasted searching through a bag of loose connectors for the right gauge. Many electricians carry two standard organizers — one for connectors and one for hardware and fasteners.
Carpenters and Remodelers — Large Organizer (48-22-8435)
Carpenters and remodelers need to carry a wide variety of fastener sizes — from small finish nails to structural screws — alongside blade sets, drill bits, and specialty hardware. The PACKOUT Large Organizer (48-22-8435) provides the compartment capacity to organize a comprehensive fastener and accessory collection in a single, IP65-protected, PACKOUT-compatible unit.
Plumbers — Compact Organizer (48-22-8430)
Plumbers typically carry a smaller but highly specific range of small parts — push-fit connector sizes, thread seal tape, valve seat washers, and small O-rings. The PACKOUT Compact Organizer (48-22-8430) handles these focused collections efficiently without adding unnecessary size or weight to the PACKOUT stack.
HVAC Technicians — Standard Organizer (48-22-8431)
HVAC technicians carry flare fittings, Schrader valve cores, refrigerant line fittings, and small electrical connectors. The PACKOUT Organizer (48-22-8431) keeps these sorted by type and size, preventing the costly job site errors that come from grabbing the wrong fitting under pressure.
How PACKOUT Organizers Fit Into Your Full PACKOUT System
The Milwaukee PACKOUT Organizers are most effective when integrated into a complete PACKOUT stack. In a typical professional configuration, the organizer sits at the top of the stack — on top of the carry cases, which sit on the rolling base. Its lighter weight keeps the center of gravity low while its position at the top of the stack makes it the first thing grabbed when you need a fastener or bit.
Stack your PACKOUT Organizer directly on top of the PACKOUT Large Tool Box (48-22-8428) or PACKOUT Compact Tool Box (48-22-8421), engage the locking tabs, and your entire system travels together on the PACKOUT Rolling Tool Box (48-22-8426). For a complete guide to building the most effective PACKOUT configuration for your trade, read our Milwaukee tool box organizer guide.
Milwaukee PACKOUT Organizers — Frequently Asked Questions
What sizes do the Milwaukee PACKOUT Organizers come in?
The Milwaukee PACKOUT Organizers come in three sizes: Compact (48-22-8430), Standard (48-22-8431), and Large (48-22-8435). Every size features secure-lid compartments, IP65 weather protection, and the universal PACKOUT locking interface. Shop all three at milwaukeetoolsbox.com.
Do the compartments in PACKOUT Organizers stay closed during transport?
Yes — every compartment in a Milwaukee PACKOUT Organizer features its own individual secure lid. Contents stay in their compartments even when the unit is tilted, inverted, or subjected to the normal bumps and vibration of vehicle transport. Nothing mixes, nothing spills.
Are Milwaukee PACKOUT Organizers waterproof?
Yes — all three Milwaukee PACKOUT Organizer sizes carry a certified IP65 weather protection rating, providing complete protection against dust and water jets from any direction.
Do Milwaukee PACKOUT Organizers connect to the rolling tool box?
Yes — all three Milwaukee PACKOUT Organizer models use the universal PACKOUT locking interface and connect directly to the PACKOUT Rolling Tool Box (48-22-8426) and every other PACKOUT unit. Stack them on top of your carry cases and they travel as part of your complete PACKOUT system.
What is the difference between the Compact and Large PACKOUT Organizer?
The PACKOUT Compact Organizer (48-22-8430) is the smallest unit — best for focused, minimal accessory collections like a single bit set or specific connector types. The PACKOUT Large Organizer (48-22-8435) provides more compartments in larger sizes for comprehensive fastener and accessory collections that cover a full trade’s daily requirements.
Can I stack a PACKOUT Organizer on top of a PACKOUT Tool Box?
Yes — every Milwaukee PACKOUT Organizer locks directly onto any PACKOUT carry case, drawer unit, or rolling base using the universal PACKOUT locking interface. The organizer typically works best at the top of the stack for easy access to small parts on the job site.
Shop Milwaukee PACKOUT Organizers Today
Three sizes. Every small part organized, protected, and instantly accessible. Authentic Milwaukee products with fast US shipping.
Reviews
There are no reviews yet.